Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen gezeigt.
Nächste Überarbeitung | Vorherige Überarbeitung Nächste Überarbeitung Beide Seiten, nächste Überarbeitung | ||
projekte:2021:eurotwo [2021/04/03 10:18] max angelegt |
projekte:2021:eurotwo [2021/04/16 22:54] max [Errata] |
||
---|---|---|---|
Zeile 16: | Zeile 16: | ||
==== Status ==== | ==== Status ==== | ||
Follow [[https:// | Follow [[https:// | ||
+ | |||
+ | === 2021-04-15 === | ||
+ | Mounted the first boards on the backplane. I started again with the ALU, similar to the preproject. Some wires left. Also the zero-detection logic is not mounted yet. But so far everything seems to work perfectly! | ||
+ | |||
+ | {{: | ||
=== 2021-01-30 === | === 2021-01-30 === | ||
Zeile 106: | Zeile 111: | ||
==== Errata ==== | ==== Errata ==== | ||
+ | === ALL === | ||
+ | - Clearing around M2 holes bigger! The problem is that after some mountings and unmountings the soldermask gets holes and the Cu gets through. You got a short circuit than. Not good! Workaround: [[https:// | ||
=== HalfAdder rev1 === | === HalfAdder rev1 === | ||
- Silkscreen: AxorB -> A&B | - Silkscreen: AxorB -> A&B | ||
- | === DigitalController | + | === DigitalController |
- RX0 and TX0 instead of MOSI and MISO for ISP (see https:// | - RX0 and TX0 instead of MOSI and MISO for ISP (see https:// | ||
- R1: 0603 -> 0804 | - R1: 0603 -> 0804 | ||
Zeile 115: | Zeile 122: | ||
- PrgEn button not needed! | - PrgEn button not needed! | ||
- Silkscreen: R55 not readable | - Silkscreen: R55 not readable | ||
+ | === Inverter / Level / Buffer rev1 === | ||
+ | - Silkscreen: LOW_A and LOW_B switched | ||
+ | - En_A und En_B and High! | ||