Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

--- projekte:xcarve_faq [2017/02/11 16:40]
michael
+++ projekte:xcarve_faq [2017/02/20 13:07]
michael
@@ Zeile 19: / Zeile 19: @@
 ==== MDF ====
-  * Feedrate: 600-1000mm/min
+  * **Feedrate:** 600-1000mm/min
-  * Depth: 1.0-1.8mm/pass
+  * **Depth:** 1.0-1.8mm/pass
-  * Endmill: 2 flute spiral
+  * **Endmill:** 2 flute spiral
-  * Speed: Dewalt 611 @ 1
+  * **Speed:** Dewalt 611 @ 1
 ==== Multiplex (Birke/Buche) ====
-  * Feedrate: 600-800mm/min
+  * **Feedrate:** 600-800mm/min
-  * Depth: 0.7-1.2mm/pass
+  * **Depth:** 0.7-1.2mm/pass
-  * Endmill: 2 flute spiral
+  * **Endmill:** 2 flute spiral
-  * Speed: Dewalt 611 @ 1
+  * **Speed:** Dewalt 611 @ 1
 ==== Plexiglas ====
-  * Feedrate: 1500-2000mm/min
+  * **Feedrate:** 1500-2000mm/min
-  * Depth: 0.1-0.25mm/pass
+  * **Depth:** 0.1-0.25mm/pass
-  * Endmill: 1/8" Upcut **1 flute** spiral
+  * **Endmill:** 1/8" Upcut **1 flute** spiral
-  * Speed: Dewalt 611 @ 1
+  * **Speed:** Dewalt 611 @ 1
 ==== Aluminium ====
-  * Feedrate: 100-150mm/min
+  * **Feedrate:** 100-150mm/min
-  * Depth: 0.1-0.15mm/pass
+  * **Depth:** 0.1-0.15mm/pass
-  * Endmill: 2 flute** endmill for alu**
+  * **Endmill:** 2 flute** endmill for alu**
-  * Speed: Dewalt 611 @ 1
+  * **Speed:** Dewalt 611 @ 1
 ==== Kupferplatte (PCB) ====
-  * Feedrate: 150-300mm/min
+  * **Feedrate:** 150-300mm/min
-  * Depth: 0.1-0.3mm/pass
+  * **Depth:** 0.1-0.3mm/pass
-  * Endmill: 1/2 flute, V-Fräser
+  * **Endmill:** 0.3-1.0mm, 1-2 flute, oder V-Fräser
-  * Speed: Dewalt 611 @ 1
+  * **Speed:** Dewalt 611 @ 1
+==== Kupferplatte (PCB-Löcher) ====
+  * **Feedrate:** 100mm/min
+  * **Endmill:** 0.3-1.0mm, 1-2 flute
+  * **Speed:** Dewalt 611 @ 1