Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

Link zu der Vergleichsansicht

Beide Seiten, vorherige Überarbeitung Vorherige Überarbeitung
projekte:berlinbadge_rev1 [2019/12/30 22:35]
max
projekte:berlinbadge_rev1 [2019/12/30 22:37] (aktuell)
max [BOM]
Zeile 12: Zeile 12:
 ===== BOM ===== ===== BOM =====
 ^ Label ^ Qty ^ Value ^ Footprint ^ Description ^ ^ Label ^ Qty ^ Value ^ Footprint ^ Description ^
-| BT1 | 1 | | JST PH 2.00mm 2-Pins Horizontal | |+| BT1 | 1 | Connector ​| JST PH 2.00mm 2-Pins Horizontal | |
 | C1, C4, C7, C9, C10, C13, C14 | 7 | 100nF | 0805 C | | | C1, C4, C7, C9, C10, C13, C14 | 7 | 100nF | 0805 C | |
 | C2, C3, C5, C6, C8, C11 | 6 | 2.2uF | 0805 C | | | C2, C3, C5, C6, C8, C11 | 6 | 2.2uF | 0805 C | |
Zeile 18: Zeile 18:
 | D1, D2, D3, D4, D5, D6, D7, D8 | 8 | WS2812B | 5050 LED P3.2mm | | | D1, D2, D3, D4, D5, D6, D7, D8 | 8 | WS2812B | 5050 LED P3.2mm | |
 | D9 | 1 | ca. 3V 10mA LED (Yellow) | 0805 LED | | | D9 | 1 | ca. 3V 10mA LED (Yellow) | 0805 LED | |
-| J1 | 1 | | 2x3 Odd_Even Pinheader 2.54mm Vertical NOT MOUNTED | | +| J1 | 1 | Connector ​| 2x3 Odd_Even Pinheader 2.54mm Vertical NOT MOUNTED | | 
-| J2 | 1 | | USB A Stewart SS52100-001 Horizontal | |+| J2 | 1 | USB A | USB A Stewart SS52100-001 Horizontal | |
 | JP1 | 1 | - | nothing to mount | Solder to match the maximum voltage of the battery | | | JP1 | 1 | - | nothing to mount | Solder to match the maximum voltage of the battery | |
 | P1 | 1 | - | nothing to mount | AVR ISProgrammer,​ [[projekte:​maxconnect|MaxConnect Link]] |  | P1 | 1 | - | nothing to mount | AVR ISProgrammer,​ [[projekte:​maxconnect|MaxConnect Link]] | 
Zeile 25: Zeile 25:
 | R2 | 1 | 1K | 0805 R | series resistor for D9, match current! | | R2 | 1 | 1K | 0805 R | series resistor for D9, match current! |
 | R4, R5, R6, R7, R8, R9 | OR | 0805 R | just for layouting reasons | | R4, R5, R6, R7, R8, R9 | OR | 0805 R | just for layouting reasons |
-| SW1 | 1 | | SPDT_PCM12 Example: [[https://​www.amazon.de/​gp/​product/​B07VF4MW5W/​ref=ppx_yo_dt_b_asin_title_o02_s00?​ie=UTF8&​psc=1|Amazon Link]] |+| SW1 | 1 | Switch ​| SPDT_PCM12 Example: [[https://​www.amazon.de/​gp/​product/​B07VF4MW5W/​ref=ppx_yo_dt_b_asin_title_o02_s00?​ie=UTF8&​psc=1|Amazon Link]] |
 | U1 | 1 | ATTiny85-20SU | SOIJ-8_5.3x5.3mm P1.27mm | [[https://​www.reichelt.de/​mcu-attiny-avr-risc-8-kb-20-mhz-so-8-attiny-85-20-su-p69300.html?&​trstct=pos_3|Reichelt ATTINY85-20SU]] | | U1 | 1 | ATTiny85-20SU | SOIJ-8_5.3x5.3mm P1.27mm | [[https://​www.reichelt.de/​mcu-attiny-avr-risc-8-kb-20-mhz-so-8-attiny-85-20-su-p69300.html?&​trstct=pos_3|Reichelt ATTINY85-20SU]] |
 | U2 | 1 | MAX1811 | SOIC-8_3.9x4.9mm P1.27 | | | U2 | 1 | MAX1811 | SOIC-8_3.9x4.9mm P1.27 | |
  • projekte/berlinbadge_rev1.txt
  • Zuletzt geändert: 2019/12/30 22:37
  • von max