Dies ist eine alte Version des Dokuments!
Nützliches
Tools
- https://github.com/akaJes/marlin-config/releases | Marlin Config Tool
- https://github.com/Elenedeath/HE3D-Firmware | Marlin FW f. HE3D
- https://www.repetier.com/firmware/v100/index.php | Marlin Config Tool 2
- http://hacker3000-data.bplaced.net/vspace.one/ | HACKER3000 Config / Testprints
Slicer:
Alternative Slicer:
3D/STL/CAD Downloaden
3D Drucker
Drucker 2 (instructed only)
Owner: vspace.one
DOCUMENT HERE
Nützliche G/M-Codes
- Lüfter (Layerblower) starten/stoppen mit M106/M107
- Druck pausieren/fortsetzen M600/M601
GCode als start.gcode in Cura Adden - Vor dem Druck
Start G-Code
;Prime the extruder G92 E0 G1 F200 E3 G92 E0
End G-Code
M104 S0 ; Extruder Temp 0 M140 S0 ; Deb Temp 0 ;Retract the filament G92 E1 G1 E-1 F300 G28 X0 Y0 M84
Calibration G-Code
G90 M280PS10.6 ; Reset probe pin G91 G1 Z30 ; Move 20 Up (relative) G90; G28 X Y ; Home X & Y (to min) M280PS3.0 ; Deploy probe pin M565 X-44.4 Y-26.1 Z0 G32 ; Probe the bed & enable compensation G1 X44.4 Y26.1 G30 Z1.3 M280PS10.6 ; Deploy probe pin M280PS7.0 ; Deploy probe pin M500 ; SAVE compensation grid