Contact: Nikolai, Kai

Projectstatus: Aufgebaut und Einsatzbereit

• ESP Relay Board zb https://www.aliexpress.com/item/1005002147923725.html
• LM2596S Stepdown für 5V
• Gespendete Glocke
• 15V Motor mit Getriebe aus der Fundkiste
• Beliebiges 15V Netzteil

esphome:
  name: spaceglocke
 
esp8266:
  board: esp01
 
# Enable logging
logger:
    baud_rate: 0 #need this to free up UART pins
 
# Enable Home Assistant API
api:
  password: ""
 
# Example configuration entry
web_server:
    port: 80
 
ota:
  password: ""
 
wifi:
  ssid: "vspace.one"
  password: "XXX"
 
uart:
  baud_rate: 115200 # speed to STC15L101EW
  tx_pin: GPIO1
  rx_pin: GPIO3
 
switch:
  - platform: uart
    name: "A1on"
    data: [0xA0, 0x01, 0x01, 0xA2]
 
  - platform: uart
    name: "A1off"
    data: [0xA0, 0x01, 0x00, 0xA1]
 
  - platform: uart
    name: "A2on"
    data: [0xA0, 0x02, 0x01, 0xA3]
 
  - platform: uart
    name: "A2off"
    data: [0xA0, 0x02, 0x00, 0xA2]
 
  - platform: restart
    name: "2switch_a Restart"